# Scylla storage config YAML

#######################################
# This file is split to two sections:
# 1. Supported parameters
# 2. Unsupported parameters: reserved for future use or backwards
#    compatibility.
# Scylla will only read and use the first segment
#######################################

### Supported Parameters

# The name of the cluster. This is mainly used to prevent machines in
# one logical cluster from joining another.
# It is recommended to change the default value when creating a new cluster.
# You can NOT modify this value for an existing cluster
#cluster_name: 'Test Cluster'

# This defines the number of tokens randomly assigned to this node on the ring
# The more tokens, relative to other nodes, the larger the proportion of data
# that this node will store. You probably want all nodes to have the same number
# of tokens assuming they have equal hardware capability.
#
# If you already have a cluster with 1 token per node, and wish to migrate to 
# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
num_tokens: 256

# Directory where Scylla should store data on disk.
# If not set, the default directory is $CASSANDRA_HOME/data/data.
data_file_directories:
    - /var/lib/scylla/data

# commit log.  when running on magnetic HDD, this should be a
# separate spindle than the data directories.
# If not set, the default directory is $CASSANDRA_HOME/data/commitlog.
commitlog_directory: /var/lib/scylla/commitlog

# commitlog_sync may be either "periodic" or "batch."
#
# When in batch mode, Scylla won't ack writes until the commit log
# has been fsynced to disk.  It will wait
# commitlog_sync_batch_window_in_ms milliseconds between fsyncs.
# This window should be kept short because the writer threads will
# be unable to do extra work while waiting.  (You may need to increase
# concurrent_writes for the same reason.)
#
# commitlog_sync: batch
# commitlog_sync_batch_window_in_ms: 2
#
# the other option is "periodic" where writes may be acked immediately
# and the CommitLog is simply synced every commitlog_sync_period_in_ms
# milliseconds.
commitlog_sync: periodic
commitlog_sync_period_in_ms: 10000

# The size of the individual commitlog file segments.  A commitlog
# segment may be archived, deleted, or recycled once all the data
# in it (potentially from each columnfamily in the system) has been
# flushed to sstables.
#
# The default size is 32, which is almost always fine, but if you are
# archiving commitlog segments (see commitlog_archiving.properties),
# then you probably want a finer granularity of archiving; 8 or 16 MB
# is reasonable.
commitlog_segment_size_in_mb: 32

# seed_provider class_name is saved for future use.
# seeds address are mandatory!
seed_provider:
    # Addresses of hosts that are deemed contact points. 
    # Scylla nodes use this list of hosts to find each other and learn
    # the topology of the ring.  You must change this if you are running
    # multiple nodes!
    - class_name: org.apache.cassandra.locator.SimpleSeedProvider
      parameters:
          # seeds is actually a comma-delimited list of addresses.
          # Ex: "<ip1>,<ip2>,<ip3>"
          - seeds: "127.0.0.1"

# Address or interface to bind to and tell other Scylla nodes to connect to.
# You _must_ change this if you want multiple nodes to be able to communicate!
#
# Setting listen_address to 0.0.0.0 is always wrong.
listen_address: localhost

# Address to broadcast to other Scylla nodes
# Leaving this blank will set it to the same value as listen_address
# broadcast_address: 1.2.3.4


# When using multiple physical network interfaces, set this to true to listen on broadcast_address
# in addition to the listen_address, allowing nodes to communicate in both interfaces.
# Ignore this property if the network configuration automatically routes between the public and private networks such as EC2.
#
# listen_on_broadcast_address: false

# port for the CQL native transport to listen for clients on
# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
native_transport_port: 9042

# Enabling native transport encryption in client_encryption_options allows you to either use
# encryption for the standard port or to use a dedicated, additional port along with the unencrypted
# standard native_transport_port.
# Enabling client encryption and keeping native_transport_port_ssl disabled will use encryption
# for native_transport_port. Setting native_transport_port_ssl to a different value
# from native_transport_port will use encryption for native_transport_port_ssl while
# keeping native_transport_port unencrypted.
#native_transport_port_ssl: 9142

# How long the coordinator should wait for read operations to complete
read_request_timeout_in_ms: 5000

# How long the coordinator should wait for writes to complete
write_request_timeout_in_ms: 2000

# phi value that must be reached for a host to be marked down.
# most users should never need to adjust this.
# phi_convict_threshold: 8

# IEndpointSnitch.  The snitch has two functions:
# - it teaches Scylla enough about your network topology to route
#   requests efficiently
# - it allows Scylla to spread replicas around your cluster to avoid
#   correlated failures. It does this by grouping machines into
#   "datacenters" and "racks."  Scylla will do its best not to have
#   more than one replica on the same "rack" (which may not actually
#   be a physical location)
#
# IF YOU CHANGE THE SNITCH AFTER DATA IS INSERTED INTO THE CLUSTER,
# YOU MUST RUN A FULL REPAIR, SINCE THE SNITCH AFFECTS WHERE REPLICAS
# ARE PLACED.
#
# Out of the box, Scylla provides
#  - SimpleSnitch:
#    Treats Strategy order as proximity. This can improve cache
#    locality when disabling read repair.  Only appropriate for
#    single-datacenter deployments.
#  - GossipingPropertyFileSnitch
#    This should be your go-to snitch for production use.  The rack
#    and datacenter for the local node are defined in
#    cassandra-rackdc.properties and propagated to other nodes via
#    gossip.  If cassandra-topology.properties exists, it is used as a
#    fallback, allowing migration from the PropertyFileSnitch.
#  - PropertyFileSnitch:
#    Proximity is determined by rack and data center, which are
#    explicitly configured in cassandra-topology.properties.
#  - Ec2Snitch:
#    Appropriate for EC2 deployments in a single Region. Loads Region
#    and Availability Zone information from the EC2 API. The Region is
#    treated as the datacenter, and the Availability Zone as the rack.
#    Only private IPs are used, so this will not work across multiple
#    Regions.
#  - Ec2MultiRegionSnitch:
#    Uses public IPs as broadcast_address to allow cross-region
#    connectivity.  (Thus, you should set seed addresses to the public
#    IP as well.) You will need to open the storage_port or
#    ssl_storage_port on the public IP firewall.  (For intra-Region
#    traffic, Scylla will switch to the private IP after
#    establishing a connection.)
#  - RackInferringSnitch:
#    Proximity is determined by rack and data center, which are
#    assumed to correspond to the 3rd and 2nd octet of each node's IP
#    address, respectively.  Unless this happens to match your
#    deployment conventions, this is best used as an example of
#    writing a custom Snitch class and is provided in that spirit.
#
# You can use a custom Snitch by setting this to the full class name
# of the snitch, which will be assumed to be on your classpath.
endpoint_snitch: GossipingPropertyFileSnitch

# The address or interface to bind the Thrift RPC service and native transport
# server to.
#
# Set rpc_address OR rpc_interface, not both. Interfaces must correspond
# to a single address, IP aliasing is not supported.
#
# Leaving rpc_address blank has the same effect as on listen_address
# (i.e. it will be based on the configured hostname of the node).
#
# Note that unlike listen_address, you can specify 0.0.0.0, but you must also
# set broadcast_rpc_address to a value other than 0.0.0.0.
#
# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
#
# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4
# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
rpc_address: localhost
# rpc_interface: eth1
# rpc_interface_prefer_ipv6: false

# port for Thrift to listen for clients on
rpc_port: 9160

# port for REST API server
api_port: 10000

# IP for the REST API server
api_address: 127.0.0.1

# Log WARN on any batch size exceeding this value. 5kb per batch by default.
# Caution should be taken on increasing the size of this threshold as it can lead to node instability.
batch_size_warn_threshold_in_kb: 5

# Fail any multiple-partition batch exceeding this value. 50kb (10x warn threshold) by default.
batch_size_fail_threshold_in_kb: 50

# Authentication backend, identifying users
# Out of the box, Scylla provides org.apache.cassandra.auth.{AllowAllAuthenticator,
# PasswordAuthenticator}.
#
# - AllowAllAuthenticator performs no checks - set it to disable authentication.
# - PasswordAuthenticator relies on username/password pairs to authenticate
#   users. It keeps usernames and hashed passwords in system_auth.credentials table.
#   Please increase system_auth keyspace replication factor if you use this authenticator.
# authenticator: AllowAllAuthenticator

# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions
# Out of the box, Scylla provides org.apache.cassandra.auth.{AllowAllAuthorizer,
# CassandraAuthorizer}.
#
# - AllowAllAuthorizer allows any action to any user - set it to disable authorization.
# - CassandraAuthorizer stores permissions in system_auth.permissions table. Please
#   increase system_auth keyspace replication factor if you use this authorizer.
# authorizer: AllowAllAuthorizer

# initial_token allows you to specify tokens manually.  While you can use # it with
# vnodes (num_tokens > 1, above) -- in which case you should provide a 
# comma-separated list -- it's primarily used when adding nodes # to legacy clusters 
# that do not have vnodes enabled.
# initial_token:

# RPC address to broadcast to drivers and other Scylla nodes. This cannot
# be set to 0.0.0.0. If left blank, this will be set to the value of
# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must
# be set.
# broadcast_rpc_address: 1.2.3.4

# Uncomment to enable experimental features
# experimental: true

# The directory where hints files are stored if hinted handoff is enabled.
# hints_directory: /var/lib/scylla/hints

# See http://wiki.apache.org/cassandra/HintedHandoff
# May either be "true" or "false" to enable globally, or contain a list
# of data centers to enable per-datacenter.
# hinted_handoff_enabled: DC1,DC2
# hinted_handoff_enabled: true

# this defines the maximum amount of time a dead host will have hints
# generated.  After it has been dead this long, new hints for it will not be
# created until it has been seen alive and gone down again.
# max_hint_window_in_ms: 10800000 # 3 hours

# Maximum throttle in KBs per second, per delivery thread.  This will be
# reduced proportionally to the number of nodes in the cluster.  (If there
# are two nodes in the cluster, each delivery thread will use the maximum
# rate; if there are three, each will throttle to half of the maximum,
# since we expect two nodes to be delivering hints simultaneously.)
# hinted_handoff_throttle_in_kb: 1024
# Number of threads with which to deliver hints;
# Consider increasing this number when you have multi-dc deployments, since
# cross-dc handoff tends to be slower
# max_hints_delivery_threads: 2

###################################################
## Not currently supported, reserved for future use
###################################################

# Maximum throttle in KBs per second, total. This will be
# reduced proportionally to the number of nodes in the cluster.
# batchlog_replay_throttle_in_kb: 1024

# Validity period for permissions cache (fetching permissions can be an
# expensive operation depending on the authorizer, CassandraAuthorizer is
# one example). Defaults to 10000, set to 0 to disable.
# Will be disabled automatically for AllowAllAuthorizer.
# permissions_validity_in_ms: 10000

# Refresh interval for permissions cache (if enabled).
# After this interval, cache entries become eligible for refresh. Upon next
# access, an async reload is scheduled and the old value returned until it
# completes. If permissions_validity_in_ms is non-zero, then this also must have
# a non-zero value. Defaults to 2000. It's recommended to set this value to
# be at least 3 times smaller than the permissions_validity_in_ms.
# permissions_update_interval_in_ms: 2000

# The partitioner is responsible for distributing groups of rows (by
# partition key) across nodes in the cluster.  You should leave this
# alone for new clusters.  The partitioner can NOT be changed without
# reloading all data, so when upgrading you should set this to the
# same partitioner you were already using.
#
# Besides Murmur3Partitioner, partitioners included for backwards
# compatibility include RandomPartitioner, ByteOrderedPartitioner, and
# OrderPreservingPartitioner.
#
partitioner: org.apache.cassandra.dht.Murmur3Partitioner

# Maximum size of the key cache in memory.
#
# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the
# minimum, sometimes more. The key cache is fairly tiny for the amount of
# time it saves, so it's worthwhile to use it at large numbers.
# The row cache saves even more time, but must contain the entire row,
# so it is extremely space-intensive. It's best to only use the
# row cache if you have hot rows or static rows.
#
# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
#
# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
# key_cache_size_in_mb:

# Duration in seconds after which Scylla should
# save the key cache. Caches are saved to saved_caches_directory as
# specified in this configuration file.
#
# Saved caches greatly improve cold-start speeds, and is relatively cheap in
# terms of I/O for the key cache. Row cache saving is much more expensive and
# has limited use.
#
# Default is 14400 or 4 hours.
# key_cache_save_period: 14400

# Number of keys from the key cache to save
# Disabled by default, meaning all keys are going to be saved
# key_cache_keys_to_save: 100

# Maximum size of the row cache in memory.
# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
#
# Default value is 0, to disable row caching.
# row_cache_size_in_mb: 0

# Duration in seconds after which Scylla should
# save the row cache. Caches are saved to saved_caches_directory as specified
# in this configuration file.
#
# Saved caches greatly improve cold-start speeds, and is relatively cheap in
# terms of I/O for the key cache. Row cache saving is much more expensive and
# has limited use.
#
# Default is 0 to disable saving the row cache.
# row_cache_save_period: 0

# Number of keys from the row cache to save
# Disabled by default, meaning all keys are going to be saved
# row_cache_keys_to_save: 100

# Maximum size of the counter cache in memory.
#
# Counter cache helps to reduce counter locks' contention for hot counter cells.
# In case of RF = 1 a counter cache hit will cause Scylla to skip the read before
# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration
# of the lock hold, helping with hot counter cell updates, but will not allow skipping
# the read entirely. Only the local (clock, count) tuple of a counter cell is kept
# in memory, not the whole counter, so it's relatively cheap.
#
# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
#
# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache.
# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache.
# counter_cache_size_in_mb:

# Duration in seconds after which Scylla should
# save the counter cache (keys only). Caches are saved to saved_caches_directory as
# specified in this configuration file.
#
# Default is 7200 or 2 hours.
# counter_cache_save_period: 7200

# Number of keys from the counter cache to save
# Disabled by default, meaning all keys are going to be saved
# counter_cache_keys_to_save: 100

# The off-heap memory allocator.  Affects storage engine metadata as
# well as caches.  Experiments show that JEMAlloc saves some memory
# than the native GCC allocator (i.e., JEMalloc is more
# fragmentation-resistant).
# 
# Supported values are: NativeAllocator, JEMallocAllocator
#
# If you intend to use JEMallocAllocator you have to install JEMalloc as library and
# modify cassandra-env.sh as directed in the file.
#
# Defaults to NativeAllocator
# memory_allocator: NativeAllocator

# saved caches
# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches.
# saved_caches_directory: /var/lib/scylla/saved_caches



# For workloads with more data than can fit in memory, Scylla's
# bottleneck will be reads that need to fetch data from
# disk. "concurrent_reads" should be set to (16 * number_of_drives) in
# order to allow the operations to enqueue low enough in the stack
# that the OS and drives can reorder them. Same applies to
# "concurrent_counter_writes", since counter writes read the current
# values before incrementing and writing them back.
#
# On the other hand, since writes are almost never IO bound, the ideal
# number of "concurrent_writes" is dependent on the number of cores in
# your system; (8 * number_of_cores) is a good rule of thumb.
# concurrent_reads: 32
# concurrent_writes: 32
# concurrent_counter_writes: 32

# Total memory to use for sstable-reading buffers.  Defaults to
# the smaller of 1/4 of heap or 512MB.
# file_cache_size_in_mb: 512

# Total space to use for commitlogs.
#
# If space gets above this value (it will round up to the next nearest
# segment multiple), Scylla will flush every dirty CF in the oldest
# segment and remove it.  So a small total commitlog space will tend
# to cause more flush activity on less-active columnfamilies.
#
# A value of -1 (default) will automatically equate it to the total amount of memory
# available for Scylla.
commitlog_total_space_in_mb: -1

# A fixed memory pool size in MB for for SSTable index summaries. If left
# empty, this will default to 5% of the heap size. If the memory usage of
# all index summaries exceeds this limit, SSTables with low read rates will
# shrink their index summaries in order to meet this limit.  However, this
# is a best-effort process. In extreme conditions Scylla may need to use
# more than this amount of memory.
# index_summary_capacity_in_mb:

# How frequently index summaries should be resampled.  This is done
# periodically to redistribute memory from the fixed-size pool to sstables
# proportional their recent read rates.  Setting to -1 will disable this
# process, leaving existing index summaries at their current sampling level.
# index_summary_resize_interval_in_minutes: 60

# Whether to, when doing sequential writing, fsync() at intervals in
# order to force the operating system to flush the dirty
# buffers. Enable this to avoid sudden dirty buffer flushing from
# impacting read latencies. Almost always a good idea on SSDs; not
# necessarily on platters.
# trickle_fsync: false
# trickle_fsync_interval_in_kb: 10240

# TCP port, for commands and data
# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
# storage_port: 7000

# SSL port, for encrypted communication.  Unused unless enabled in
# encryption_options
# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
# ssl_storage_port: 7001

# listen_interface: eth0
# listen_interface_prefer_ipv6: false

# Internode authentication backend, implementing IInternodeAuthenticator;
# used to allow/disallow connections from peer nodes.
# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator

# Whether to start the native transport server.
# Please note that the address on which the native transport is bound is the
# same as the rpc_address. The port however is different and specified below.
# start_native_transport: true

# The maximum threads for handling requests when the native transport is used.
# This is similar to rpc_max_threads though the default differs slightly (and
# there is no native_transport_min_threads, idle threads will always be stopped
# after 30 seconds).
# native_transport_max_threads: 128
#
# The maximum size of allowed frame. Frame (requests) larger than this will
# be rejected as invalid. The default is 256MB.
# native_transport_max_frame_size_in_mb: 256

# The maximum number of concurrent client connections.
# The default is -1, which means unlimited.
# native_transport_max_concurrent_connections: -1

# The maximum number of concurrent client connections per source ip.
# The default is -1, which means unlimited.
# native_transport_max_concurrent_connections_per_ip: -1

# Whether to start the thrift rpc server.
# start_rpc: true

# enable or disable keepalive on rpc/native connections
# rpc_keepalive: true

# Scylla provides two out-of-the-box options for the RPC Server:
#
# sync  -> One thread per thrift connection. For a very large number of clients, memory
#          will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size
#          per thread, and that will correspond to your use of virtual memory (but physical memory
#          may be limited depending on use of stack space).
#
# hsha  -> Stands for "half synchronous, half asynchronous." All thrift clients are handled
#          asynchronously using a small number of threads that does not vary with the amount
#          of thrift clients (and thus scales well to many clients). The rpc requests are still
#          synchronous (one thread per active request). If hsha is selected then it is essential
#          that rpc_max_threads is changed from the default value of unlimited.
#
# The default is sync because on Windows hsha is about 30% slower.  On Linux,
# sync/hsha performance is about the same, with hsha of course using less memory.
#
# Alternatively,  can provide your own RPC server by providing the fully-qualified class name
# of an o.a.c.t.TServerFactory that can create an instance of it.
# rpc_server_type: sync

# Uncomment rpc_min|max_thread to set request pool size limits.
#
# Regardless of your choice of RPC server (see above), the number of maximum requests in the
# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
# RPC server, it also dictates the number of clients that can be connected at all).
#
# The default is unlimited and thus provides no protection against clients overwhelming the server. You are
# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
#
# rpc_min_threads: 16
# rpc_max_threads: 2048

# uncomment to set socket buffer sizes on rpc connections
# rpc_send_buff_size_in_bytes:
# rpc_recv_buff_size_in_bytes:

# Uncomment to set socket buffer size for internode communication
# Note that when setting this, the buffer size is limited by net.core.wmem_max
# and when not setting it it is defined by net.ipv4.tcp_wmem
# See:
# /proc/sys/net/core/wmem_max
# /proc/sys/net/core/rmem_max
# /proc/sys/net/ipv4/tcp_wmem
# /proc/sys/net/ipv4/tcp_wmem
# and: man tcp
# internode_send_buff_size_in_bytes:
# internode_recv_buff_size_in_bytes:

# Frame size for thrift (maximum message length).
# thrift_framed_transport_size_in_mb: 15

# Set to true to have Scylla create a hard link to each sstable
# flushed or streamed locally in a backups/ subdirectory of the
# keyspace data.  Removing these links is the operator's
# responsibility.
# incremental_backups: false

# Whether or not to take a snapshot before each compaction.  Be
# careful using this option, since Scylla won't clean up the
# snapshots for you.  Mostly useful if you're paranoid when there
# is a data format change.
# snapshot_before_compaction: false

# Whether or not a snapshot is taken of the data before keyspace truncation
# or dropping of column families. The STRONGLY advised default of true 
# should be used to provide data safety. If you set this flag to false, you will
# lose data on truncation or drop.
# auto_snapshot: true

# When executing a scan, within or across a partition, we need to keep the
# tombstones seen in memory so we can return them to the coordinator, which
# will use them to make sure other replicas also know about the deleted rows.
# With workloads that generate a lot of tombstones, this can cause performance
# problems and even exaust the server heap.
# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets)
# Adjust the thresholds here if you understand the dangers and want to
# scan more tombstones anyway.  These thresholds may also be adjusted at runtime
# using the StorageService mbean.
# tombstone_warn_threshold: 1000
# tombstone_failure_threshold: 100000

# Granularity of the collation index of rows within a partition.
# Increase if your rows are large, or if you have a very large
# number of rows per partition.  The competing goals are these:
#   1) a smaller granularity means more index entries are generated
#      and looking up rows withing the partition by collation column
#      is faster
#   2) but, Scylla will keep the collation index in memory for hot
#      rows (as part of the key cache), so a larger granularity means
#      you can cache more hot rows
# column_index_size_in_kb: 64


# Number of simultaneous compactions to allow, NOT including
# validation "compactions" for anti-entropy repair.  Simultaneous
# compactions can help preserve read performance in a mixed read/write
# workload, by mitigating the tendency of small sstables to accumulate
# during a single long running compactions. The default is usually
# fine and if you experience problems with compaction running too
# slowly or too fast, you should look at
# compaction_throughput_mb_per_sec first.
#
# concurrent_compactors defaults to the smaller of (number of disks,
# number of cores), with a minimum of 2 and a maximum of 8.
# 
# If your data directories are backed by SSD, you should increase this
# to the number of cores.
#concurrent_compactors: 1

# Throttles compaction to the given total throughput across the entire
# system. The faster you insert data, the faster you need to compact in
# order to keep the sstable count down, but in general, setting this to
# 16 to 32 times the rate you are inserting data is more than sufficient.
# Setting this to 0 disables throttling. Note that this account for all types
# of compaction, including validation compaction.
# compaction_throughput_mb_per_sec: 16

# Log a warning when compacting partitions larger than this value
# compaction_large_partition_warning_threshold_mb: 100

# When compacting, the replacement sstable(s) can be opened before they
# are completely written, and used in place of the prior sstables for
# any range that has been written. This helps to smoothly transfer reads 
# between the sstables, reducing page cache churn and keeping hot rows hot
# sstable_preemptive_open_interval_in_mb: 50

# Throttles all streaming file transfer between the datacenters,
# this setting allows users to throttle inter dc stream throughput in addition
# to throttling all network stream traffic as configured with
# stream_throughput_outbound_megabits_per_sec
# inter_dc_stream_throughput_outbound_megabits_per_sec:

# How long the coordinator should wait for seq or index scans to complete
# range_request_timeout_in_ms: 10000
# How long the coordinator should wait for writes to complete
# counter_write_request_timeout_in_ms: 5000
# How long a coordinator should continue to retry a CAS operation
# that contends with other proposals for the same row
# cas_contention_timeout_in_ms: 1000
# How long the coordinator should wait for truncates to complete
# (This can be much longer, because unless auto_snapshot is disabled
# we need to flush first so we can snapshot before removing the data.)
# truncate_request_timeout_in_ms: 60000
# The default timeout for other, miscellaneous operations
# request_timeout_in_ms: 10000

# Enable operation timeout information exchange between nodes to accurately
# measure request timeouts.  If disabled, replicas will assume that requests
# were forwarded to them instantly by the coordinator, which means that
# under overload conditions we will waste that much extra time processing 
# already-timed-out requests.
#
# Warning: before enabling this property make sure to ntp is installed
# and the times are synchronized between the nodes.
# cross_node_timeout: false

# Enable socket timeout for streaming operation.
# When a timeout occurs during streaming, streaming is retried from the start
# of the current file. This _can_ involve re-streaming an important amount of
# data, so you should avoid setting the value too low.
# Default value is 0, which never timeout streams.
# streaming_socket_timeout_in_ms: 0

# controls how often to perform the more expensive part of host score
# calculation
# dynamic_snitch_update_interval_in_ms: 100 

# controls how often to reset all host scores, allowing a bad host to
# possibly recover
# dynamic_snitch_reset_interval_in_ms: 600000

# if set greater than zero and read_repair_chance is < 1.0, this will allow
# 'pinning' of replicas to hosts in order to increase cache capacity.
# The badness threshold will control how much worse the pinned host has to be
# before the dynamic snitch will prefer other replicas over it.  This is
# expressed as a double which represents a percentage.  Thus, a value of
# 0.2 means Scylla would continue to prefer the static snitch values
# until the pinned host was 20% worse than the fastest.
# dynamic_snitch_badness_threshold: 0.1

# request_scheduler -- Set this to a class that implements
# RequestScheduler, which will schedule incoming client requests
# according to the specific policy. This is useful for multi-tenancy
# with a single Scylla cluster.
# NOTE: This is specifically for requests from the client and does
# not affect inter node communication.
# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
# client requests to a node with a separate queue for each
# request_scheduler_id. The scheduler is further customized by
# request_scheduler_options as described below.
# request_scheduler: org.apache.cassandra.scheduler.NoScheduler

# Scheduler Options vary based on the type of scheduler
# NoScheduler - Has no options
# RoundRobin
#  - throttle_limit -- The throttle_limit is the number of in-flight
#                      requests per client.  Requests beyond 
#                      that limit are queued up until
#                      running requests can complete.
#                      The value of 80 here is twice the number of
#                      concurrent_reads + concurrent_writes.
#  - default_weight -- default_weight is optional and allows for
#                      overriding the default which is 1.
#  - weights -- Weights are optional and will default to 1 or the
#               overridden default_weight. The weight translates into how
#               many requests are handled during each turn of the
#               RoundRobin, based on the scheduler id.
#
# request_scheduler_options:
#    throttle_limit: 80
#    default_weight: 5
#    weights:
#      Keyspace1: 1
#      Keyspace2: 5

# request_scheduler_id -- An identifier based on which to perform
# the request scheduling. Currently the only valid option is keyspace.
# request_scheduler_id: keyspace

# Enable or disable inter-node encryption. 
# You must also generate keys and provide the appropriate key and trust store locations and passwords. 
# No custom encryption options are currently enabled. The available options are:
#
# The available internode options are : all, none, dc, rack
# If set to dc scylla  will encrypt the traffic between the DCs
# If set to rack scylla  will encrypt the traffic between the racks
#
# server_encryption_options:
#    internode_encryption: none
#    certificate: conf/scylla.crt
#    keyfile: conf/scylla.key
#    truststore: <none, use system trust>
#    require_client_auth: False
#    priority_string: <none, use default>

# enable or disable client/server encryption.
# client_encryption_options:
#    enabled: false
#    certificate: conf/scylla.crt
#    keyfile: conf/scylla.key
#    truststore: <none, use system trust>
#    require_client_auth: False
#    priority_string: <none, use default>

# internode_compression controls whether traffic between nodes is
# compressed.
# can be:  all  - all traffic is compressed
#          dc   - traffic between different datacenters is compressed
#          none - nothing is compressed.
# internode_compression: none

# Enable or disable tcp_nodelay for inter-dc communication.
# Disabling it will result in larger (but fewer) network packets being sent,
# reducing overhead from the TCP protocol itself, at the cost of increasing
# latency if you block for cross-datacenter responses.
# inter_dc_tcp_nodelay: false

# Relaxation of environment checks.
#
# Scylla places certain requirements on its environment.  If these requirements are
# not met, performance and reliability can be degraded.
#
# These requirements include:
#    - A filesystem with good support for aysnchronous I/O (AIO). Currently,
#      this means XFS.
#
# false: strict environment checks are in place; do not start if they are not met.
# true: relaxed environment checks; performance and reliability may degraade.
#
# developer_mode: false


# Idle-time background processing
#
# Scylla can perform certain jobs in the background while the system is otherwise idle,
# freeing processor resources when there is other work to be done.
#
# defragment_memory_on_idle: true
#
# prometheus port
# By default, Scylla opens prometheus API port on port 9180
# setting the port to 0 will disable the prometheus API.
# prometheus_port: 9180
#
# prometheus address
# By default, Scylla binds all interfaces to the prometheus API
# It is possible to restrict the listening address to a specific one
# prometheus_address: 0.0.0.0

# Distribution of data among cores (shards) within a node
#
# Scylla distributes data within a node among shards, using a round-robin
# strategy:
#  [shard0] [shard1] ... [shardN-1] [shard0] [shard1] ... [shardN-1] ...
#
# Scylla versions 1.6 and below used just one repetition of the pattern;
# this intefered with data placement among nodes (vnodes).
#
# Scylla versions 1.7 and above use 4096 repetitions of the pattern; this
# provides for better data distribution.
#
# the value below is log (base 2) of the number of repetitions.
#
# Set to 0 to avoid rewriting all data when upgrading from Scylla 1.6 and
# below.
#
# Keep at 12 for new clusters.
murmur3_partitioner_ignore_msb_bits: 12